 |
| |
| JAN 2012 Ver. 5.4.22.0 |
| V8 series SYS PROG: version V1.750 |
| V7 series SYS PROG: version V1.920 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
V8 series: PLCs newly supported.
· OMRON E5CN-HT supported.
· TOSHIBA MACHINE TC200 Device added.
· VIGOR M series supported.
· LS XGT/XGI series supported.
· LS XGT/XGI series (Ethernet) supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP ASCII) supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP ASCII) supported.
|
| V808C portrait orientation supported. |
| V-SFT-5: Filtering function for project view added. |
| V-SFT-5: Numerical data display parts on the panel meter change function added. |
| OCT 2011 Ver. 5.4.21.0 |
| V8 series SYS PROG: version V1.720 |
| V7 series SYS PROG: version V1.910 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: versionV1.940 |
V8 series: PLCs newly supported.
· FUJI WSZ series supported.
· MITSUBISHI Q170MCPU (multi CPU) supported.
· MITSUBISHI Q170MCPU (multi CPU) (Ethernet) supported.
· Siemens S7-200(Ethernet ISOTCP) supported.
|
V8 series:
· Macro command search function added
· Panel meter functions available with 128 colors , 256 colors and monochrome type
· E-mail port No. change function added
· RGB (input) display compatible with V7
· V8 series: Windows font size in points available up to 999
|
| JUL 2011 Ver. 5.4.20.0 |
| V8 series SYS PROG: version V1.680 |
| V7 series SYS PROG: version V1.910 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
V7 series: System Program fixe
· Please refer to Improvement Information for further information.
|
| JUN 2011 Ver. 5.4.19.0 |
| V8 series SYS PROG: version V1.680 |
| V7 series SYS PROG: version V1.900 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
| V-SFT-5: Failure fixed |
| APR 2011 Ver. 5.4.18.0 |
| V8 series SYS PROG: version V1.670 |
| V7 series SYS PROG: version V1.890 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
V8 series: PLCs newly supported.
· YAMATAKE DMC50(COM) C Device supported.
· DELTA TAU DATA SYSTEMS PMAC P_INT Device supported.
· DELTA TAU DATA SYSTEMS PMAC(Ethernet TCP/IP) P_INT Device supported.
· YOKOGAWA FA-M3 SW/SL Extended Command supported.
· YOKOGAWA FA-M3R SW/SL Extended Command supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) SW/SL/F Extended Command supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) SW/SL/F Extended Command supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) System-log read command supported.
· YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) System-log read command supported.
· YOKOGAWA FA-M3/FA-M3R the defult setting of Communication parameter changed.
· Universal Serial from PLC1 to PLC8 supported.
· Jetter JetControl Series2/3(Ethernet UDP/IP) supported.
· TOHO TTM-000 supported.
· Allen-Bradley NET-ENI(SLC500 Ethernet TCP/IP) supported.
· Allen-Bradley NET-ENI(Micrologix Ethernet TCP/IP) supported.
· Fuji Electric FALDIC-W series supported.
· GE Fanuc 90 Series(SNP-X) Multi Link2 compatible with V7 supported.
· SHARP JW300 series supported.
· SHARP JW series(Ethernet) supported.
· SHARP JW311/213/321/322(Ethernet) supported.
· SHARP JW331/332/341/342/352/362(Ethernet) supported.
· Fuji Electric MicrexSX Redundancy supported.
· KOYO SR-T(K Protocol) supported.
· KOYO SU/SG supported.
· GE Fanuc 90 series supported.
|
V7 series: PLCs newly supported.
· Fuji Electric MicrexSX T-Link Redundancy supported.
|
PLC Ladder transfer function added:
· MITSUBISHI QnA LadderMonitor supported
|
V8 series:
· Range after scaling numbers in Number Display reflected to Minimum and Maximum numbers.
· The function of printing Data Sheet extended.
|
V-SFT-5:
· The dialogue setting of MES reformed.
· The order INC of the Entry Target possible to be changed by Batch Change.
· Windows Vista/Windows 7 64bit supported.
· The addition of Attribute Specification Memory in Detail Tab of Number Display.
· The brightness adjusting Macro/ BRIGHT/ for V808CH supported.
· Tags of importing of Siemes S7-200 Format supported.
|
| FEB 2011 Ver. 5.4.17.0 |
| V8 series SYS PROG: version V1.650 |
| V7 series SYS PROG: version V1.880 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
V8 series: PLCs newly supported.
· YAMATAKE NX(CPL)
· YAMATAKE NX(Modbus RTU)
· YAMATAKE NX(Modbus TCP/IP)
· Agilent 4263 series
· Turck BL Series Distributed I/O (MODBUS TCP/IP)
· RKC FB100/FB400/FB900 (MODBUS RTU)
· MOELLER PS4
· FUJI FRENIC5000G11S/P11S
· FUJI PH series
· Allen-Bradley ControlLogix(Ethernet) CPU slot No. supported.
|
| V8 series: Grobal Overlap supported. |
| V8 series: Additional features for a panel meter supported. |
| V8 series: Mute setting for Overlap buzzer supported. |
| V8 series: UPDATE function added to MES macro command. |
| V8 series: Backup making feature for Recipe function supported. |
| V8 series: Archive error log for wiring to external media supported. |
V-SFT-5:
· Marging feature for the message supported.
· The limit of the number of the letters in a switch/lamp changed.
|
| NOV 2010 Ver.5.4.16.0 |
| V8 series SYS PROG: version V1.610 |
| V7 series SYS PROG: version V1.870 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
| V-SFT-5: Failure fixed |
| OCT 2010 Ver.5.4.15.0 |
| V8 series SYS PROG: version V1.610 |
| V7 series SYS PROG: version V1.870 |
| V6 series SYS PROG: version V1.930 |
| V606e series SYS PROG: version V1.940 |
V8 series: PLCs newly supported.
· SANMEI CutyAxis
· OMRON SYSMAC CS1/CJ1 DNA
· OMRON SYSMAC CS1/CJ1 DNA(Ethernet)
· Siemens S7-1200(Ethernet ISOTCP)
· CIMON BP series
· CIMON CP series
· CHINO LT230(MODBUS RTU)
· CHINO LT300(MODBUS RTU)
· CHINO LT830(MODBUS RTU)
· CHINO DB1000B(MODBUS RTU)
· CHINO KR2000(MODBUS RTU)
· Bosch Rexroth IndraDrive
|
V7 series: PLCs newly supported.
· Siemens S7-1200(Ethernet ISOTCP)
· MITUBISHI QnU built-in Ethernet
|
| V8 series: Continuous printing of data sheet printing supported. |
| V8 series: Float numbers supported for trend graph / trend sampling and data sampling. |
| V8 series: Add and delete for numbers supported for numeral entry. |
| V8 series: Offset memory supported for numeral data display and character display. |
V-SFT-5:
· Remapping of the destination screen number supported for the switch function [screen].
· End memory designation and memory count designation supported for Memory batch change.
|
| JUL 2010 Ver.5.4.14.0 |
| V8 series SYS PROG: version V1.570 |
| V7 series SYS PROG: version V1.860 |
| V6 series SYS PROG: version V1.930 |
V8 series: PLCs newly supported.
· WAGO 750series(MODBUS RTU)
· WAGO 750series(MODBUS Ethernet)
· UNITORONICS Vision Series(ASCII Ethernet TCP/IP)
· HITACHI HIDIC-S10α
· MITSUBISHI QnU series(Built-in Ethernet)
· MITSUBISHI L series link
· MITSUBISHI L series (Built-in Ethernet)
|
| V8 series: Remote Desktop: Auto reduction function enhanced. |
| V8 series: Operation Log: Filtered display of the log viewer added. |
| V8 series: Operation Log: Operation log can be selected with each switch. |
| V8 series: Yokogawa: Comment can be uploaded when using ladder monitor feature. |
| V8 series: Mitsubishi: Compatible memory device extended with Q series. |
| V8 series: Macro command: IF(TST) macro command added. |
| V8 series: Macro command: GRE_TO_CLND command added (converting date). |
| V8 series: Graphs: Float data supported. |
| V8 series: Total number to be registered is extended with Overlap Library/Screen Library/Page Block |
| JUN 2010 Ver.5.4.13.0 |
| V8 series SYS PROG: version V1.560 |
| V7 series SYS PROG: version V1.850 |
| V6 series SYS PROG: version V1.930 |
V8 series: System Program fixe
· - The system program will be upgraded to Ver.1.560 due to the change of the flash memory which
is used in V8 series.
|
| APR 2010 Ver.5.4.12.0 |
| V8 series SYS PROG: version V1.530 |
| V7 series SYS PROG: version V1.850 |
| V6 series SYS PROG: version V1.930 |
V7 series: System Program fixe
· - Problem of the calendar readout with some PLCs fixed.
· Please refer to Improvement Information for further information.
|
| APR 2010 Ver.5.4.11.0 |
| V8 series SYS PROG: version V1.530 |
| V7 series SYS PROG: version V1.840 |
| V6 series SYS PROG: version V1.930 |
V8 series PLCs newly supported.
· FUJI FVR-E11S
· M-SYSTEM R1M series(MODBUS RTU)
· OMRON KM20-B40
· OMRON KM100
|
| V8 series: Panasonic network camera supported. |
| V8 series: Japanese Conversion Function - supported models extended. |
| V8 series:OMRON SYSMAC CS1/CJ1 USB/Ethernet ladder transfer function |
V8 series: MODBUS RTU EXP Free Format
· maximum settable table number extended.
|
| V8 series: Return switch - returning to the screen changed externally supported. |
| V8 series: PLC ladder monitor - supported function extended. |
V8 series: PLC ladder monitor
· OMRON CJ1 supported.
|
| V8 series: Multi-link2 compatibility with V7 supported. |
| V-SFT-5: Windows 7 supported. |
| V-SFT-5: Font size became changeable in Macro edit screen. |
| V-SFT-5: Comments in multiple lines supported in Macro edit screen |
| V-SFT-5: File name added to the title in Macro edit screen |
| V-SFT-5: Selection Environment Setting - Option to apply to all screens supported. |
| V-SFT-5: Option for auto-update of System Program (SYS PRG) supported. |
| Frame Auto Fit - right-click menu added to support the batch change of multiple parts. |
| V-SFT-5: Tag - usage list function supported. |
| FEB 2010 Ver.5.4.10.0 |
| V8 series SYS PROG: version 1.520 |
| V7 series SYS PROG: version 1.830 |
| V6 series SYS PROG: version 1.930 |
V8 series PLCs newly supported.
· GLOFA CNET
· GLOFA GM series CPU
· Allen-Bradley PLC-5
· MITSUBISHI MR-J2S-*A
· SHARP DS-30D
· SHARP DS-32D
· YASKAWA MP2000
· YASKAWA MP2000 series (Ethernet)
|
| Trend Graph: Background drawing feature supported. |
| V-SFT-5: Import/export feature in Tag Database supported. |
| V-SFT-5: Memory/number remapping when moving screens supported. |
| V-SFT-5: Batch change of Screen Library supported. |
| V-SFT-5: Extended cross-reference feature supported. |
| V-SFT-5: export/import of Network Table supported |
| NOV 2009 Ver.5.4.9.0 |
| V8 series SYS PROG: version 1.500 |
| V7 series SYS PROG: version 1.820 |
| V6 series SYS PROG: version 1.930 |
V8 series PLCs newly supported.
· Automationdirect DirectLOGIC(Ethernet UDP/IP)
· IDEC MICRO Smart pentra
· TOSHIBA MACHINE VELCONIC series
· MODBUS RTU EXP Format
|
| OCT 2009 Ver.5.4.8.0 |
| V8 series SYS PROG: version 1.460 |
| V7 series SYS PROG: version 1.800 |
| V6 series SYS PROG: version 1.910 |
| V8 series: MITSUBISHI ladder monitor extensions. |
| V8 series: YOKOGAWA USB/Ethernet ladder transfer function supported. |
| V8 series: Symbol edit function supported. |
V8 series PLCs newly supported.
· CHINO DP1000G
· IAI RCP2/ERC
· IAI RCS/E-CON
· FUJI ELECTRIC MicrexSX(SPH) Batch activation/stop supported.
· FUJI ELECTRIC FRENIC-MEGA(MODBUS RTU) Broadcast writing supported.
· FUJI ELECTRIC FRENIC-5000VG7S(MODBUS RTU) Broadcast writing supported.
· FUJI ELECTRIC FRENIC-Multi(MODBUS RTU) Broadcast writing supported.
· FUJI ELECTRIC FRENIC-Eco(MODBUS RTU) Broadcast writing supported.
· FUJI ELECTRIC PXG(MODBUS RTU) Port number is extended up to no. 247.
· FUJI ELECTRIC PXH(MODBUS RTU) Port number is extended up to no. 247.
· FUJI ELECTRIC PHR(MODBUS RTU) Port number is extended up to no. 247.
|
| V-SFT-5: Macro symbol can be appeared on switch. |
| V8 series: 2-port supported with touchswitch emulation. |
| V8 series: Logout function supported in macro. |
| V8 series: Network camera AXIS M1011 supported. |
| V8 series: V7 compatible display in PAL supported. |
| AUG 2009 Ver.5.4.7.0 |
| V8 series SYS PROG: version 1.460 |
| V7 series SYS PROG: version 1.800 |
| V6 series SYS PROG: version 1.910 |
V8 series PLCs newly supported.
· MODICON ModbusRTU
· MITUBISHI MR-J3-*T
· SHIMADEN Shimaden Standard Protocol
· MODBUS RTU 1:n Multi-link2(Ethernet) supported.
· Telemecanique TSX Micro
· SHINKO TECHNOS JCx-300 series
· LS GLOFA GM series (Ethernet UDP/IP)
|
| V8 series: RKC Setting range of the station number was extended |
| JUL 2009 Ver.5.4.6.0 |
New model
· S808 series is added.
|
V8/V7/V6 series PLCs newly supported.
· MITUBISHI FX3 series (A Protocol) supported.
|
V8 series PLCs newly supported.
· MITUBISHI A series (CC-Link) supported.
· MITUBISHI QnA series (CC-Link) supported.
· GE Fanuc 90 series(Ethernet TCP/IP) supported.
· DELTA DVP series supported.
|
| V8 series: Allen-Bradley: BOOL is supported forControl Logix/Compact Logix |
| V8 series: Modbus RTU: Data length of 7-bit is added. |
| V8 series: "Continuous buzzer" for switch supported. |
| V-SFT-5: Macro tool bar added. |
| V-SFT-5: Batch setting of the Page block edit is supported. |
| MAY 2009 Ver.5.4.4.0 |
V8series PLCs newly supported.
· MITSUBISHI FX3U-ENET supported.
· UNIPULSE F720A supported.
· UNIPULSE F800 supported.
· EMERSON EC10/20/20H (MODBUS RTU) supported.
|
| APR 2009 Ver.5.4.3.0 |
| V8 sereis: AB: Memory range extended from 65:255 to 255:255 |
| Fuji: SX Instrumentation Package function supported. |
| V808C: V609E compatible display function added. (128-color only) |
V8series PLCs newly supported.
· Hitachi Industrial Equipment System SJ300series supported.
· Hitachi Industrial Equipment System SJ700series supported.
· UNIPULSE F340A supported.
· UNIPULSE F371 supported.
· TOSHIBA EXseries supported.
· Banner Vision Ethernet I/P Protcol supported.
· MITSUBISHI QnH(Q)series (Ethernet ASCII) supported.
· MITSUBISHI QnH(Q)series (Multhi CPU) (Ethernet ASCII) supported.
· Siemens S7-200PPI: 187.5kbps supported.
|
V7/V6series PLCs newly supported.
· KEYENCE KV-3000/5000 supported.
|
| FEB 2009 Ver.5.4.1.0 |
| V8 sereis: Remote Desktop function supported. |
V8series PLCs newly supported.
· FL-Net supported.
|
|
|
