Key word
		* You can refine your search by selecting the category on the right. * When entering multiple key words, put a space in between.

	FAQ concerning MONITOUCH
	Key word : There is no specification.
	Corresponding FAQ is 86

No. Question 1 Q1 Communication error "Timeout" 2 Q2 Communication error "Error code received" 3 Q3 "Data has some error.  Error: XX (XX: XXX)" 4 Q4 "Screen No. Error" 5 Q5 "Communication Error Check I/F driver" 6 Q6 "FONT DATA NOT SETTING" 7 Q7 "Touch Switch Is Active." 8 Q8 "Insert CF Card in V7" 9 Q9 "Communication Error Received Code No. 05" 10 Q10 "Receive timeout" 11 Q11 "The port cannot be opened." 12 Q12 "The size is too large to communicate." 13 Q13 "The font file cannot be found." 14 Q14 "The check level is wrong." 15 Q1 Communication between MONITOUCH and the PLC is slow. 16 Q2 Communication is slow between the temperature controller and MONITOUCH. 17 Q3 Pressing the touch switch activates nowhere or a position that deviates from the switch. 18 Q4 The POWER LED does not light up. 19 Q5 MONITOUCH does not switch to the Main Menu screen. 20 Q6 The screen on MONITOUCH is not switched ,though an instruction is given from the PLC (external). 21 Q7 Overlap editing is disabled. 22 Q8 I switched from a screen showing an overlap to another screen.  When I returned to the pervious screen, the overlap was erased from it. 23 Q9 Pressing a switch does not activate it. 24 Q10 Switches cannot be placed in arbitrary positions. 25 Q11 Although the bit at the specified lamp memory address is not set (not ON), the lamp lights up. 26 Q12 The previously displayed numeric figure or character remains in a numerical data display or character display part. 27 Q13 A character display part does not display characters (with the use of the Windows fonts or the HK Gothic/Times font). 28 Q14 The keypad does not work (entry is not possible). 29 Q15 Negative values or decimal fractions cannot be entered through a keypad. 30 Q16 When a character entry switch is pressed, its text is cleared from the switch.  31 Q17 Trend graphs cannot be displayed. 32 Q18 The data displayed in a trend graph is different from the most recent data in the PLC. 33 Q19 The graphic does not move on an animated screen. 34 Q20 The transparency of a pattern is not effective on an animated screen. 35 Q21 Messages are not displayed in the alarm display.  36 Q22 Messages are not displayed by bit sampling. 37 Q23 Pressing the reset switch does not clear the buffering area. 38 Q24 In the alarm display, messages are not displayed by the number of times as intended. 39 Q25 SRAM cannot be formatted. 40 Q26 MONITOUCH does not recognize the CF card. 41 Q27 The date is not displayed correctly. 42 Q28 On a screen in multiple languages I created, the displayed language cannot be switched. 43 Q29 Ladder transfer cannot be performed properly. 44 Q30 Upgrading in the website of Hakko Electronics is disabled (under Windows XP SP2).  45 Q1 How can I make the screen dark whenever it is left untouched for the predetermined time? 46 Q2 How can I turn on a continuous buzzer sound? 47 Q3 How can I adjust the brightness of the screen? 48 Q4 How can I copy a screen from one file to another? 49 Q5 How can I paste the currently displayed screen into another application like Microsoft Word? 50 Q6 When I want to print the screen data from the computer, how can I print the memory addresses allocated to switches, etc. at the same time? 51 Q7 How can I search for memory addresses allocated to screens? 52 Q8 How can I display an overlap from the PLC (external)? 53 Q9  While an overlap is displayed, how can I disable the switches on the base screen and the other overlaps? 54 Q10  While editing the base screen, how can I hide overlaps from the screen? 55 Q11  How can I overlay one switch on another on the screen? 56 Q12 How can I change the design of a part? 57 Q13  How can I limit the values that can be entered through the keypad? 58 Q14 How can I designate entry targets, in which data can be entered? 59 Q15  How can I set asynchronous display of multiple lines in a trend graph? 60 Q16 How can I draw reference lines in a trend graph? 61 Q17 How can I save sampling data even after power-off? 62 Q18  How can I save the sampling data to a CSV file? 63 Q19  How can I save the sampling data to CSV files by date? 64 Q20 How can I check whether or not a CF card is inserted? 65 Q21  How can I store screen data on a CF card? 66 Q22  While a CF card is inserted in MONITOUCH, how can I pull data from the card? 67 Q23  How can I use a CF card with a minimum of concern for its life or other limitations? 68 Q24 How can I set (correct) the calendar? 69 Q25 How can I display screens in foreign languages? 70 Q26  How can I switch between languages without a CF card? 71 Q27  How can I check the communication conditions between the temperature controller and MONITOUCH? 72 Q28 How can I perform data reading and writing between the temperature controller and the PLC memory or the internal memory at regular intervals? 73 Q29 How can I connect two temperature controllers from different manufacturers? 74 Q30 How can I connect a MONITOUCH only to a temperature controller without its connection to a PLC? 75 Q31  How can I shorten the screen data transfer time (with V6-CP (serial connection)). 76 Q32 How can I check the operation of screens without connecting MONITOUCH to a PLC? 77 Q33 How can I replace an old-model MONITOUCH with a newer model? 78 Q1 How long will the backlight last?  79 Q2 Is the backlight replaceable?  80 Q3 What are the differences between an analog switch and a matrix switch? 81 Q4 Is pressing two switches at the same time allowed?  82 Q1 Which PLC models can be connected?  83 Q2 Which temperature controller and inverter models can be connected? 84 Q3 Which printers are available?  85 Q4 Which barcode readers are available?  86 Q6 Which CF cards are available?

	ΔTop