Key word
		* You can refine your search by selecting the category on the right. * When entering multiple key words, put a space in between.

	FAQ concerning MONITOUCH > Operation Troubles
	Key word : There is no specification.
	Corresponding FAQ is 30

No. Question 1 Q1 Communication between MONITOUCH and the PLC is slow. 2 Q2 Communication is slow between the temperature controller and MONITOUCH. 3 Q3 Pressing the touch switch activates nowhere or a position that deviates from the switch. 4 Q4 The POWER LED does not light up. 5 Q5 MONITOUCH does not switch to the Main Menu screen. 6 Q6 The screen on MONITOUCH is not switched ,though an instruction is given from the PLC (external). 7 Q7 Overlap editing is disabled. 8 Q8 I switched from a screen showing an overlap to another screen.  When I returned to the pervious screen, the overlap was erased from it. 9 Q9 Pressing a switch does not activate it. 10 Q10 Switches cannot be placed in arbitrary positions. 11 Q11 Although the bit at the specified lamp memory address is not set (not ON), the lamp lights up. 12 Q12 The previously displayed numeric figure or character remains in a numerical data display or character display part. 13 Q13 A character display part does not display characters (with the use of the Windows fonts or the HK Gothic/Times font). 14 Q14 The keypad does not work (entry is not possible). 15 Q15 Negative values or decimal fractions cannot be entered through a keypad. 16 Q16 When a character entry switch is pressed, its text is cleared from the switch.  17 Q17 Trend graphs cannot be displayed. 18 Q18 The data displayed in a trend graph is different from the most recent data in the PLC. 19 Q19 The graphic does not move on an animated screen. 20 Q20 The transparency of a pattern is not effective on an animated screen. 21 Q21 Messages are not displayed in the alarm display.  22 Q22 Messages are not displayed by bit sampling. 23 Q23 Pressing the reset switch does not clear the buffering area. 24 Q24 In the alarm display, messages are not displayed by the number of times as intended. 25 Q25 SRAM cannot be formatted. 26 Q26 MONITOUCH does not recognize the CF card. 27 Q27 The date is not displayed correctly. 28 Q28 On a screen in multiple languages I created, the displayed language cannot be switched. 29 Q29 Ladder transfer cannot be performed properly. 30 Q30 Upgrading in the website of Hakko Electronics is disabled (under Windows XP SP2).

	ΔTop