A setting is made so as to upload the data (on screens, etc.) from the CF card automatically at MONITOUCH power-on.However, the CF card is not inserted into MONITOUCH.
[Solutions]
<With any V7 other than V706>
Check if DIP switch No. 1 is on.If the switch is on, automatic uploading is enabled and MONITOUCH accesses the CF card.
If automatic uploading is not necessary, turn off the power and DIP switch No. 1.
<With V706>
Check if DIP switch No. 4 is on.
If automatic uploading is not necessary, turn off the power and DIP switch No. 4.
