HOME > [ PRODUCTS ] TELLUS and V-Server/ License Validation
 License Validation
License Validation by Using License Key
License Validation by Entering Password
License Types
|
 |
| |
| When you use SOFT MONITOUCH TELLUS and V-Server, you must do the license validation by using license key or entering password. You can use SOFT MONITOUCH TELLUS and V-Server with the following restrictions as the trial period until the license validation is completed. Check the type of
license for functions to be used before applying for the licenses. |
| < Restrictions > |
| ♦ |
The software completes operations with an alarm message after one hour of operation. |
| ♦ |
TELLUS Remote mode can be used 100 times only. There is no restriction for the use of TELLUS in Emulation mode, HMI mode, or V-Server. |
|
|
|
| |
| There are four types of licenses, one for each function. Check the type of license for the function(s) to be used before applying for the license(s). |
|
 |
| 1. |
Apply to our distributor for User ID specifying the type of license. |
| 2. |
User ID is issued to the applicant. |
| * |
One user ID is given to one user. The User ID is required when you apply for additional licenses or a password. Keep a record of the ID number. |
|
 |
Confirm the computer on which you will use TELLUS & V-Server to get a PCID.
A unique PCID is assigned to each computer respectively. Be sure to conduct confirmation on the computer that you will use for TELLUS & V-Server.
|
| 1. |
Start the TELLUS or the V-Server. |
| 2. |
A dialog window "This application is running under trial period. Do you want to set a password?" will appear. Click [Yes]. |
| 3. |
The "Password Setting" window will appear so that you can confirm the PCID. |
|
 |
After obtaining your User ID and confirming the PCID, you can get a password following the steps shown below.
|
| 1. |
Fill in an "Application Form" included in the TELLUS & V-Server CD and submit it to our distributor. |
| 2. |
Password(s) will be notified through our distributor. |
|
 |
| 1. |
Start the TELLUS or the V-Server. |
| 2. |
A dialog window "This application is running under trial period. Do you want to set a password?" will appear. Click [Yes]. |
| 3. |
The Password Setting window will open. Type in the Password you have received from Hakko. |
| * |
The PCID and the Password must match each other. Typing in another computer's Password does not allow license validation. Type in the correct Password. |
If you have any questions, please contact here. |
|
|
| |
| You need a license to use TELLUS and V-Server. License validation is restricted to one license per computer. There are eight types of license, one for each function. (See below. Click on part of the figure to zoom in.) Check the type of license for the function(s) you wish to use it for. |
| License Key |
| USB |
TELLUS-HMI USB key |
 |
| USB |
TELLUS-Remote USB key |
 |
| USB |
TELLUS & V-Server USB key |
 |
| CD |
V-Server CD key |
 |
|
|
| Password Authentication |
| TELLUS-HMI |
|
| TELLUS-Remote |
|
| TELLUS & V-Server |
|
| V-Server |
|
|
| < Notes > |
| ♦ |
When reinstalling the application software on the same computer, the same password is valid. |
| ♦ |
If you reinstall the OS or change the computer on which the application software is installed, the password becomes invalid. In this case, you must go through the license validation procedure again to get a new password. |
| ♦ |
Contact our Sales Section for further information. |
|
| |
|
