MONITOUCH
PRODUCTS SUPPORT FAQ DISTRIBUTORS COMPANY
Hakko Electronics
MONITOUCH
HOME > [ PRODUCTS ] V7 Series/ Specifications V715
V7 Series – Specifications of V715 Hardware Specifications/ Performance Specifications

  Hardware Specifications    Performance Specifications
Hardware Specifications
 
 
Item / Model V715
AC DC
Complied Standards - CE marking:
EN61000-6-2,
EN55011 Class A
UL/cUL:UL60950
Power supply Rated voltage AC100-240V DC24V
Permissible range of voltage AC100-240V±10% DC24 V± 10%
Permissible momentary power failure Within 20ms Within 1ms
Demand
(maximum rating)		 90VA or less 40W or less
Inrush current 15A, 10ms or less (100V AC)
30A, 10ms or less (200V AC)		 30A, 1ms or less
Withstand voltage Between AC external terminal and FG: 1500V AC, 1min Between DC external terminal and FG: 500V AC, 1min
Insulation resistance 500V DC, 10 MΩ or more
Physical environment Operation ambient temperature 0°C ~ +40°C
Storage ambient temperature -10°C ~ +50°C
Relative humidity 85%RH or less (without dew condensation)
Altitude for operation 2,000 meter elevation or lower
Resistance to solvent No attachment of cutting oil or organic solvent
Operating environment Avoid exposure to corrosive gas, large amounts of dust and any conductive dust
Mechanical operating condition Resistance to vibration Vibration frequency: 10-150Hz, Acceleration: 9.8m/s2 (1.0G)
Pulsating width: 0.075mm, 3 directions of X, Y, and Z: one hour each
Resistance to impact Pulse shape: half-sine, Peak acceleration: 147m/s2(15G), 3 directions of X, Y, and Z: 6 times each
Electric operating condition Noiseproof 1500Vp-p (Pulse width 1μs, Pulse rise time: 1ns) 1000Vp-p (Pulse width 1μs, Pulse rise time: 1ns)
Static discharge Complying with IEC61000-4-2, Contact: 6kV, Air: 8kV
Installation conditions Grounding Grounding resistance: 100 Ω or less
Structure Protective structure:
Front panel: Complying with IP65 (When waterproof gasket is used)
Rear cover: Complying with IP20
Single unit
Installation method: Panel mounting
Cooling system Natural air cooling
Weight Approx. 5.2kg Approx. 5.0kg
Dimensions
W × H × D (mm)		 382.8 × 312.8 × 81.1
Panel cutout (mm)
369.4 +0.5 × 299.4 +0.5
-0 -0
Material Aluminum
*SG and FG are connected inside V715 unit.

ΔTop
 
Performance Specifications
 
 
Model V715X
Display specification Screen memory FLASH memory with approx. 4,992kB (can be increased depending on font)
Display size 15 inches
Display device TFT color LCD
Resolution W:H(dots) 1,024 × 768
Colors 32,768 colors + 16 colors blink
Backlight CCFL (User replaceable)
Backlight auto OFF Always lit (Set by the user)
Power lamp Lit when power is ON
Contrast adjustment Fixed
Brilliance control 128 steps (Changed into 3 levels by function switch and adjusted to 128 grades by macro command)
Number of characters 1/4 size
1-byte
2-byte		 127 columns × 96 lines
127 columns × 48 lines
64 columns × 48 lines
Enlargement of characters X: 1-8 times, Y: 1-8 times
Touch panel specification Operation method Analog resistance membrane
Switch resolution 1,024(W) × 1,024(H)
Mechanical life 1 million times or more
Surface treatment Hard coating, Non glare finish 5%
Function switch Number of function switches 8 switches
Real time clock Provided
External interface For PLC
(CN1:D-Sub25pins)		 RS-232C, RS-422/485, Asynchronous type, Data length:7,8 bits,
Parity: even, odd, none, Stop bit:1,2 bits,
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
For data transfer/other external interface1,2 (modular 8pins) RS-232C, RS-422/485 (two-wire system), CREC, Bar-code reader, V-I/O, Multi-link 2, Temperature Controller Network/ PLC2way, V-link
CF card interface Compatible with CompactFlashTM
Ethernet 100BASE-TX, 10BASE-T (V7i standard equipment) Complying with IEEE802.3
Baud rate: 10Mbps, 100Mbps
Cable: 100 Ω unsealed twist pair, Category 5, Max length: 100M
USB interface Type A, Type B (Ver. 1)
Clock & Backup memory Battery Coin-type lithium primary battery
Backup memory SRAM(128KB)
Backup period 5 years (Ambient temperature 25°C)
Calendar accuracy Gap: ± 90 sec. per month (Ambient temperature 25°C)
Extension memory cassette (option) V7EM-F (Flash memory cassette: 8MB for display data extension)
V7EM-S (SRAM cassette: sampling data, 512 KB for memory backup)
Video (option) GU-00 (Video input +sound output unit)
RGB input (option) GU-01(RGB input +sound output unit)
RGB output (option) GU-02 (RGB output +sound output unit)
Sound output (option) GU-03 (Sound output unit)
Communication unit (option) CU-xx

ΔTop