MONITOUCH
PRODUCTS SUPPORT FAQ DISTRIBUTORS COMPANY
Hakko Electronics
MONITOUCH
HOME > [ PRODUCTS ] V7 Series/ Specifications V706
V7 Series – Specifications of V706 Hardware Specifications/ Performance Specifications of V706

  Hardware Specifications    Performance Specifications
Hardware Specifications
 
 
Item / Model V706
Power supply Rated voltage 24V DC
Permissible range of voltage 24V DC±10%
Permissible momentary power failure Within 1ms
Demand (maximum rating) 16W or less
Inrush current 20A, 0.7ms or less
Insulation resistance 500V DC, 10MΩ or more
Physical environment Operation ambient temperature 0°C ~ +50°C *1
Storage ambient temperature -10°C ~ +60°C
Relative humidity 85%RH or less (without dew condensation)
Resistance to solvent No attachment of cutting oil or organic solvent
Operating environment Avoid exposure to corrosive gas, large amounts of dust and any conductive dust
Mechanical operating condition Resistance to vibration Vibration frequency: 10~150Hz, Acceleration: 9.8m/s2(1.0G) Pulsating width: 0.075mm, 3 directions of X, Y, and Z: one hour each
Resistance to impact Pulse shape: half-sine, Peak acceleration: 147m/s2(15G), 3 directions of X, Y, and Z: 6 times each
Electric operating condition Noise proof 1,000Vp-p (Pulse width 1μs, Pulse rise time: 1ns)
Static discharge Complying with IEC61000-4-2, Contact: 6kV, Air: 8kV
Installation conditions Grounding Grounding resistance: 100 Ω or less
Structure Protective structure:
Front panel: Complying with IP65 (when water-proof gasket is used.)
Rear cover: Complying with IP20
Form: Single unit
Installation method: Panel mounting
Cooling system Natural air cooling
Weight 680g
Incl. DU-01: 820g
Dimensions
W × H × D(mm)		 182.5 × 138.8 × 42.5
Incl. DU-01: 182.5 × 138.8 × 64.0
Panel cutout (mm)
174 +0.5 × 131 +0.5
-0 -0
Case color Black (Munsell N2.0)
Material PC/PS
*1 Degradation may occur on standard models (706C/706M) when used at high ambient temperature (40-50°C) for a long time.

ΔTop
 
Performance Specifications
 
 
Model V706T V706C V706M
Display specification Screen memory FLASH memory with approx. 1,472kB (can be increased depending on font)
Display size 5.7 inches
Display device TFT color LCD STN color LCD STN Monochrome LCD
Resolution W × H (dots) 320 × 240
Colors 32,768 colors + 16 colors blink Monochrome 8 hues + blink
Backlight CCFL (User replaceable)
Backlight auto OFF Always lit (Set by the user)
Power lamp Lit (green) when power is ON, red for alarm when power battery is low
Contrast adjustment Fixed Adjustable*1
Brilliance control 128 steps *2 Fixed
Number of characters 1/4 size
1-byte
2-byte		 8 × 8 dots
8 × 16 dots
16 × 16 dots
Enlargement of characters X: 1-8 times, Y: 1-8 times
Touch panel specification Operation method Resistance membrane
Switch resolution Analog: 1024(W) × 1024(H)
Matrix: 20(W) × 12(H)
Mechanical life 1 million times or more
Surface treatment Hard coating, Non glare finish 5%
Function switch Number of function switches 6 switches
Real time clock Provided
External interface For PLC
(CN1:D-Sub25pins) *3		 RS-232C, RS-422/485, Asynchronous type, Data length: 7,8 bits,
Parity: even, odd, none, Stop bit: 1,2 bits,
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
For data transfer/other external interface1,2 (modular 8pins) *4 RS-232C, RS-422/485 (two-wire system), CREC, Bar-code reader, V-I/O, Multi-link2, Temperature Controller Network/ PLC2way, V-link
CF card interface Compatible with CompactFlashTM
Ethernet 100BASE-TX, 10BASE-T (V7i standard equipment) Complying with IEEE802.3
Baud rate: 10Mbps, 100Mbps3
Cable: 100Ω unsealed twist pair, Category 5, Max length: 100M
USB interface Type A, Type B (Ver. 1)
Clock & Backup memory Battery Coin-type lithium primary battery
Backup memory SRAM (128KB)
Backup period 5 years (Ambient temperature 25°C)
Calendar accuracy Gap: ±90 sec per month (Ambient temperature 25°C)
Extension memory cassette (option) V7EM-F (Flash memory cassette: 8MB for display data extension)
V7EM-S (SRAM cassette: sampling data, 512 KB for memory backup)
V7EM-L (Flash memory cassette: 4MB for ladder monitor/ 4MB for display data extension)
Video (option) None
RGB input (option) None
RGB output (option) None
Sound output (option) None
Communication unit (option) CU-xx
*1 Adjusted with function switch or by macro command
*2 Changed into 3 levels by function switch and adjusted to 128 grades by macro command.
*3 Only when equipped with an optional unit
*4 MJ1 only (MJ2 is for the connection with PLC)

ΔTop